Home / Greenlightvapes G9 SOC Peak Wax Vaporizer Kit

Greenlightvapes G9 SOC Peak Wax Vaporizer Kit

Greenlightvapes G9 SOC Peak Electric Dab Rig Wax Vaporizer ENail Kit Temperature Control 2600mAh Battery Ceramic Coil Atomizer with Glass Water Bubbler Bong Shisha Wax Concentrate ENail Dry Herb Vaporizer E Nail Set
35 sold
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Specifications

    Product Size: 90*67m*160mm Battery capacity: 2600mAh Resistance: 2.0ohm Heating Nail: Ceramic Temperature Adjust: 450℉-500℉-550℉-600℉ Product weight: 275g

    How to work:

    1. On/Off: 5 clicks 2. 4 Heat Settings: 3 clicks Blue light : 450F Green light: 500F Red light: 550F White light: 600F 3. Press and hold the button for 3 seconds. It Starts to heat up when you hear the beep. ----When you hear the beep and the temperature reaches the Settings temperature, you can use it. ----When you hear the beep again. heat working will be ended. 4. Standby for 5 minutes automatically shut down Full charge time:2-3 hours

    Temperature Control:

    (1) Low gear (lights are bright blue) Temperature: 450F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature for 70 seconds, there is a buzzer sound); (2) Mid-range (indicator is bright green) Temperature: 500F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature for 70 seconds, there is a buzzer sound); (3) 3. High-grade (lights are red) Temperature: 550F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature of 70 seconds, there is a buzzer sound); (4) The highest grade (lights are bright white) Temperature: 600F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature of 70 seconds, there is a buzzer sound);

    Working Procedures:

    (1) Press the switch 5 times continuously to display the battery indicator; (2) After starting, press the button three times to switch the temperature file for a total of 4 speeds; (3) After starting, press and hold the button for 3 seconds (short sound of the buzzer) to turn on the heating mode; the indicator light will always flash during the heating process (the color of the flashing light is the same as the temperature of the temperature light), and there is a buzzer when the heating time is up. Long ringing; at the end of a heating cycle, the buzzer sounds twice; during heating, press and hold the button to stop heating; (4) After switching on and off, standby for 5 minutes, shut down;

    Introduction:

    1. Power display: After starting, press to display the battery (1) Red: represents the battery voltage is less than 3.5V; (2) Yellow: indicates that the battery voltage is between 3.5V and 3.7V; (3) Green: the battery voltage is between 3.7V and 3.9V; (4) Blue: indicates that the battery voltage is greater than 3.9V; 2. Matching mode: If you change the heating element, press the button 8 times in succession to match the battery with the heating element and restore the factory settings. 3. Charging method: Micro-USB 5V direct charge, battery input current limit 2A, charging time: 2H or so; 4. Safety warning: (1) Red light flashes 3 times: low battery; (2) Red flash 5 times: short circuit; (3) The red is always on: overheating;

    Package Includes:

    1 x SOC base. 1 x Glass Attachment. 1 x Atomiz. 1 x Carb cap. 1 x Aromiz cover. 3 x Ceramic bowls 3 x Cotton swabs 2 x Alcohl pads 1 x Loading tool 1 x USB cable 1 x Wax container 1 x Use manual

  • Customer Reviews