Greenlightvapes G9 SOC Peak Wax Vaporizer Kit

Specifications

Product Size: 90*67m*160mm Battery capacity: 2600mAh Resistance: 2.0ohm Heating Nail: Ceramic Temperature Adjust: 450℉-500℉-550℉-600℉ Product weight: 275g

How to work:

1. On/Off: 5 clicks 2. 4 Heat Settings: 3 clicks Blue light : 450F Green light: 500F Red light: 550F White light: 600F 3. Press and hold the button for 3 seconds. It Starts to heat up when you hear the beep. ----When you hear the beep and the temperature reaches the Settings temperature, you can use it. ----When you hear the beep again. heat working will be ended. 4. Standby for 5 minutes automatically shut down Full charge time:2-3 hours

Temperature Control:

(1) Low gear (lights are bright blue) Temperature: 450F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature for 70 seconds, there is a buzzer sound); (2) Mid-range (indicator is bright green) Temperature: 500F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature for 70 seconds, there is a buzzer sound); (3) 3. High-grade (lights are red) Temperature: 550F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature of 70 seconds, there is a buzzer sound); (4) The highest grade (lights are bright white) Temperature: 600F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature of 70 seconds, there is a buzzer sound);

Working Procedures:

(1) Press the switch 5 times continuously to display the battery indicator; (2) After starting, press the button three times to switch the temperature file for a total of 4 speeds; (3) After starting, press and hold the button for 3 seconds (short sound of the buzzer) to turn on the heating mode; the indicator light will always flash during the heating process (the color of the flashing light is the same as the temperature of the temperature light), and there is a buzzer when the heating time is up. Long ringing; at the end of a heating cycle, the buzzer sounds twice; during heating, press and hold the button to stop heating; (4) After switching on and off, standby for 5 minutes, shut down;

Introduction:

1. Power display: After starting, press to display the battery (1) Red: represents the battery voltage is less than 3.5V; (2) Yellow: indicates that the battery voltage is between 3.5V and 3.7V; (3) Green: the battery voltage is between 3.7V and 3.9V; (4) Blue: indicates that the battery voltage is greater than 3.9V; 2. Matching mode: If you change the heating element, press the button 8 times in succession to match the battery with the heating element and restore the factory settings. 3. Charging method: Micro-USB 5V direct charge, battery input current limit 2A, charging time: 2H or so; 4. Safety warning: (1) Red light flashes 3 times: low battery; (2) Red flash 5 times: short circuit; (3) The red is always on: overheating;

Package Includes:

1 x SOC base. 1 x Glass Attachment. 1 x Atomiz. 1 x Carb cap. 1 x Aromiz cover. 3 x Ceramic bowls 3 x Cotton swabs 2 x Alcohl pads 1 x Loading tool 1 x USB cable 1 x Wax container 1 x Use manual